SAMSUNG SM-G530FZ DUMP FILE READ BY UFI & READ BY EASY JTAG PLUS 512 mb

 READ BY UFI

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0xFE (Micron)

 Product name: P1J95K (0x50314a39354b), rev: 0x13, serial number: 0x0C83BE1C

 Manufacturing date: Apr 2015

CID: FE014E50 314A3935 4B130C83 BE1C4238

CSD: D06E0132 0F5913FF FFFFFFEF 92400070

EXT_CSD revision: 1.6 (MMC v4.5, v4.51) 

Partition info:

 Boot1: 2 MiB

 Boot2: 2 MiB

 RPMB: 2 MiB [Provisioned, counter: 29]

 User area: 7.28 GiB(7,818,182,656 bytes)

Cache size: 256 KiB

Partition configuration: 0x00

 No boot acknowledge is sent (default)

 Device is not boot-enabled (default)

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

ANDROID System Info:

 platform: msm8916, cpu abi: armeabi-v7a

 manufacturer: samsung

 board: MSM8916, name: grandprimeltexx

 brand: samsung, model: SM-G530FZ

 build model list: SM-G530FZ

 build id: KTU84P, version: 4.4.4 [Lollipop] (KTU84P.G530FZXXU1AOA6)

 build description: grandprimeltexx-user 4.4.4 KTU84P G530FZXXU1AOA6 release-keys

Internal storage: 5.34 GiB

crypto state: unencrypted

Selected: [Micron] (JWA60)MT29TZZZ8D5BKFAH-125W/8GB   (BGA221)

READ BY EASY JTAG PLUS

Setting interface to EasyJtag2/ISP_HiPower

Setting bus width to 1 Bit

HiPower mode is ON

Setting frequence to 36 MHz

CMD Pullup Level: 1713 mV

CMD Active Level: 1772 mV

EMMC Device Information :

EMMC CID: FE014E50314A39354B130C83BE1C4239

EMMC CSD: D06E01320F5913FFFFFFFFEF92400071

EMMC Manufacture : MICRON , EMMC NAME: P1J95K , HEX: 50314A39354B , S/N: 0C83BE1C , rev. 0x13

EMMC Manufacture ID: 0xFE , OEM ID: 0x4E , Device Type: BGA (Discrete embedded) , Date: 4/2015

   EMMC ROM 1 (Main User Data) Capacity: 7456 MB (0001D2000000)

   EMMC ROM 2/3 (Boot Partition 1/2) Capacity: 2048 KB (000000200000)

   EMMC RPMB (Replay Protected Memory Block) Capacity: 2048 KB (000000200000) Counter: 29 , Response: Not Clean

EMMC Permanent Write Protection: No

EMMC Temporary Write Protection: No

Extended CSD Information :

Extended CSD rev: 1.6 (MMC 4.5, MMC 4.51)

Boot configuration [PARTITION_CONFIG]: 0x00 , Boot from: no boot

Boot Bus Config: 0x00 , width 1bit

H/W Reset Function [RST_N_FUNCTION]: 0x00, RST_n signal is temporarily disabled

Supported partition features [PARTITIONING_SUPPORT]: 0x07

Device supports partitioning features

Device can have enhanced technological features in partitions and user data area

Device can have extended partitions attribute

Partition Settings [PARTITION_SETTING_COMPLETED]: 0x00

Backup saved: P1J95K_0C83BE1C_20210422_135756.extcsd

EMMC Init completed.

Get firmware version

sm-g520fzdumpfile

Brand = samsung

Manufacturer = samsung

Device = grandprimelte

Model = SM-G530FZ

Phone platform = msm8916

CPU Abi = armeabi-v7a

Android release = 4.4.4

Firmware version = KTU84P.G530FZXXU1AOA6

Firmware date = Fri Jan 23 17:04:31 KST 2015