OPPO A1K CPH1923 DUMP FIRMWARE FILE UFI BOX

 onnection status: XHCI:HUB3:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

VCCQ not properly connected

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 24MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: QD63MB (0x514436334d42), rev: 0x03, serial number: 0x2B3E9777

 Manufacturing date: Aug 2019

CID: 15010051 4436334D 42032B3E 9777867E

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4096 KiB

 Boot2: 4096 KiB

 RPMB: 16384 KiB

 User area: 29.12 GiB(31,268,536,320 bytes)

Cache size: 64 MiB

Hardware reset function: 1

Partition configuration: 0x48

 Boot acknowledge is sent during the boot operation

 Boot partition 1 is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x02

  Bus width: x8 (sdr/ddr), boot mode: sdr(default), reset bus width to x1 sdr(default)

Boot area write protection: 0x00

 Power-on write protection: possible

 Permanent write protection: possible

 Lock status: not locked

CPH1923

ANDROID System Info:

 platform: MT6765, cpu abi: arm64-v8a

 manufacturer: OPPO

 board: oppo6762_18540, name: CPH1923

 brand: OPPO, model: CPH1923 (OPPO A1k)

 build model list: CPH1923 (OPPO A1k)

 build id: PPR1.180610.011, version: 9 Pie (CPH1923EX_11_A.36)

 build description: full_oppo6762_18540-user 9 PPR1.180610.011 eng.root.20201009.233612 release-keys

crypto state: encrypted?

crypto state: encrypted?

Custom moviNAND command is not supported for this device(MMC51).

Detected: SAMSUNG moviNAND KMQD60003M-BXXX/32G