OPPO A3S CPH1803 DUMP FIRMWARE FILE UFI BOX FULL DUMP FILE

Connection status: XHCI:HUB3:[#0]:USB 2.00 High-Speed

Interface: UFI High-Speed

Serial number: 0011-8842-5443

 Boot version: 1.05, FW version: 1.13 (Aug 19 2019 23:46:09)

Insertion test... Done

Init bus...

VCC: 3.3 V, VCCQ: 1.8 V

Bus: 1 bit (SDR 4MHz)

Access mode: sector mode

Power supply: dual-voltage (1.70-1.95V, 2.7-3.6V)

 Card/BGA: BGA (Discrete embedded) - High density MMC

 Manufacturer ID: 0x15 (Samsung)

 Product name: QE63MB (0x514536334d42), rev: 0x03, serial number: 0x7D4D06ED

 Manufacturing date: Aug 2018

CID: 15010051 4536334D 42037D4D 06ED85C4

CSD: D0270132 0F5903FF F6DBFFEF 8E40400C

EXT_CSD revision: 1.8 (MMC v5.1) 

Partition info:

 Boot1: 4 MiB

 Boot2: 4 MiB

 RPMB: 4 MiB [Provisioned, counter: 176805]

 User area: 14.56 GiB(15,634,268,160 bytes)

Cache size: 64 MiB

Hardware reset function: 1

Partition configuration: 0x38

 No boot acknowledge is sent (default)

 User area is enabled for boot

Partitioning support: 0x07

 Device support partitioning feature

 Device can have enhanced technological features

 Device partitioning possible

Boot configuration protection: 0x00

Boot bus conditions: 0x00

Boot area write protection: 0x00

CPH1803

ANDROID System Info:

 platform: msm8953, cpu abi: arm64-v8a

 manufacturer: OPPO

 board: msm8953, name: CPH1803

 brand: OPPO, model: CPH1803 (OPPO A3s)

 build model list: CPH1803 (OPPO A3s)

 build id: OPM1.171019.026, version: 8.1.0 [Oreo] (CPH1803EX_11_A.34)

 build description: msm8953_64-user 8.1.0 OPM1.171019.026 eng.root.20210122.143520 release-keys

crypto state: encrypted?

Custom moviNAND command is not supported for this device(MMC51).

Selected: [SAMSUNG] KMQE60013M-B318/16GB+LPDDR3 16Gb   (BGA221)